|
Batch Water Ionizer
AP-155
The 21st Century Kitchen Appliance
The First Batch Water Ionizer
AP-155 replacement filter (1 micron Carbon with KDF):
Advantages of a Batch Water Ionizer:
Portability - Great for travel
Lightweight
User-friendly
Sits on the countertop, no faucet connections necessary
No unsightly hose connections
Approximate size of a coffee maker
Specifications of the AP-155 Water Ionizer
Name: Desktop Ionized Water Generator |
|
Model |
AP-155 |
Power |
AC110V 50/60Hz |
Power Consumption |
200 Watts |
Standby Power Consumption |
2.0 Watts |
Appearance Size |
H 16 × W 5.5 × D 12.5 (inches) |
Product Weight |
Approximately 5.7 lbs |
Capacity Of Water Inlet Box |
1500 mL (50 oz) |
Capacity Of Storage Tank |
800mL (27 oz) |
Water Outfall Volume |
Around 1100 mL (37 oz) |
Water Feeding Method |
Motor driven pump |
Continuous Use Time |
About 75 seconds (or until water inlet box is full) |
Electrolysis Power |
Two strengths of alkalinity (Standard - Strong) |
Electrode Cleaning |
Manual cleaning |
Standard Filter Lifetime |
300 liters (80 gallons) |
Filter Type |
1 micron Carbon with KDF |
Protection Device |
Current fuse 3.15 A |
Length Of Power Line |
About 2m (6.5 ft) |
Water Temperature |
41ºF – 95ºF |
How to use the Batch Water Ionizer:
 |
Step 1: Be sure the unit is plugged into an electrical outlet, preferably a GFI Safety Outlet. Place the filter o-ring in the top of unit. Place the filter on top of the o-ring so it is securely seated in the unit. |
 |
Step 2: You may use bottled, tap or well water from your home faucet to fill the tank on the unit. For best results we recommend using a bottled spring or mineral water. |
 |
Step 3: Open the lid on the water container. Fill the water up to the top of the container.
Do not overflow the upper fill tank. Overflow can result in serious damage to the unit. It may also result in electrical danger. |
 |
Step 4: After installing the water filter choose the pH setting (Standard or High). Begin Ionization process by pressing the Ionized Water button in the center of the control panel. Hold until glass or container is full. |
 |
Step 5: To use the Acidic Water wait 1-2 minutes after pressing Ionized Water button. Pull out on the Acidic reservoir tank and use as desired. |
|
|